These two are not quite a pair but look like it. I had a few rides on them on my Vernon Barker, and one ride on my Colnago. I am now switching out to shiny alu rims. I will likely regret selling these. Very little wear, braking surfaces perfectly flat, hubs smooth.
Front: Giant SLR1 carbon clincher, 620g including tape. 30mm deep, 17mm internal width. £110 £44
Rear: Light Bicycle R35 rim with braking grooves on a Bitex RAR9 hub, Campagnolo freehub. 753g. 35mm deep, 19mm internal width. £165 £64
.
Rear carbon wheel: Light bicycle rim on a Hope Mono Pro III wheel. £145 £58
45mm deep, 19mm internal. A stiff, strong wheel and about 800-850g. Campangolo freehub but I have the Shimano freehub body someplace. Braking surface is still flat but is discoloured, hub smooth.
.
Corima carbon wheel (destickered) - £65 £55 SOLD
.
Vision t30 (Team 30?) alu clincher wheels - £125 £50
Excellent condition, very light and fast aluminium wheels. Braking surfaces flat, hubs smooth. Shimano freehub.
.
Climbing wheelset: Kinlin XR200 on Bitex/Taiwanese hubs - £150 SOLD
.
Wolber T430 Alpine rims on Campangolo low flange hubs - £75 £30
Decent condition, braking surfaces flat. Dark grey anodising is looking nice. Hub smooth but could probably use a service, rear axle cones need tightening at the very least. Includes the Shimano freewheel with nice usable range.
.
Wolber Gentleman 81 Super Champion rims on Suzue low flange QR hubs (Japanese) - £45 SOLD
Braking surfaces good, bearings good. Would scrub up real pretty after rubbing with some wet steel wool. Regina Oro freewheel in decent condition.
.
Shimano RS front clincher, black - £20 £8
A perfectly acceptable training wheel! It will not let you down! Braking surfaces good if slightly concave, bearings good. Much of a Shimano QR lever included, but not the nut! Gatorskin is usable, just. I think the tube is flat.
.
Black clincher - £15 £6
Another perfectly acceptable training wheel! Braking surface flat, bearings good.
.
Rigida Chrina rim on silver hub - £15 £6
Really quite acceptable. Braking surface is a little concave. Bearings good.
.
Mavic T221 rim on Shimano hub - £15 £6
Eminently acceptable! Tyre not good. Braking surfaces good, hub good.
.
Also:
Ultegra 8 speed hub on Open Pro (I think) rim. £ Free. Picture. Freehub pawls are not engaging on the hub body, so it freewheels in both directions. Needs an overhaul.
Beater 700c wheel. Rust on hub shell but everything works. £ Free. Picture
Clincher wheels
More pictures here.
These two are not quite a pair but look like it. I had a few rides on them on my Vernon Barker, and one ride on my Colnago. I am now switching out to shiny alu rims. I will likely regret selling these. Very little wear, braking surfaces perfectly flat, hubs smooth.
Front: Giant SLR1 carbon clincher, 620g including tape. 30mm deep, 17mm internal width.
£110£44Rear: Light Bicycle R35 rim with braking grooves on a Bitex RAR9 hub, Campagnolo freehub. 753g. 35mm deep, 19mm internal width.
£165£64.
Rear carbon wheel: Light bicycle rim on a Hope Mono Pro III wheel.
£145£5845mm deep, 19mm internal. A stiff, strong wheel and about 800-850g. Campangolo freehub but I have the Shimano freehub body someplace. Braking surface is still flat but is discoloured, hub smooth.
.
Corima carbon wheel (destickered)-£65£55 SOLD.
Vision t30 (Team 30?) alu clincher wheels -
£125£50Excellent condition, very light and fast aluminium wheels. Braking surfaces flat, hubs smooth. Shimano freehub.
.
Climbing wheelset: Kinlin XR200 on Bitex/Taiwanese hubs - £150SOLD.
Wolber T430 Alpine rims on Campangolo low flange hubs -
£75£30Decent condition, braking surfaces flat. Dark grey anodising is looking nice. Hub smooth but could probably use a service, rear axle cones need tightening at the very least. Includes the Shimano freewheel with nice usable range.
.
Wolber Gentleman 81 Super Champion rims on Suzue low flange QR hubs (Japanese) - £45SOLDBraking surfaces good, bearings good. Would scrub up real pretty after rubbing with some wet steel wool. Regina Oro freewheel in decent condition.
.
Shimano RS front clincher, black -
£20£8A perfectly acceptable training wheel! It will not let you down! Braking surfaces good if slightly concave, bearings good. Much of a Shimano QR lever included, but not the nut! Gatorskin is usable, just. I think the tube is flat.
.
Black clincher -
£15£6Another perfectly acceptable training wheel! Braking surface flat, bearings good.
.
Rigida Chrina rim on silver hub -
£15£6Really quite acceptable. Braking surface is a little concave. Bearings good.
.
Mavic T221 rim on Shimano hub -
£15£6Eminently acceptable! Tyre not good. Braking surfaces good, hub good.
.
Also:
Ultegra 8 speed hub on Open Pro (I think) rim. £ Free. Picture. Freehub pawls are not engaging on the hub body, so it freewheels in both directions. Needs an overhaul.
Beater 700c wheel. Rust on hub shell but everything works. £ Free. Picture