You are reading a single comment by @chrisbmx116 and its replies.
Click here to read the full conversation.
-
Pulled some masking tap off to check it worked and all good, although it did rip the paint edge in one place, prob due to it not being 100% dry.
I thought it was best to take masking tape off before it completely dries
-
Nice pic
-
You could 'reverse' fill the tape (if you didn't do that), like first mask it, paint over the tape with white, let it dry, and then paint with the color – the masking tape is then filled with the white color, and can't fill so much with the other color underneath. We have tried this hack once with white and a greenish color, and it was a little bit better for sure.
Jameo
withered_preacher
Madhias
@chrisbmx116
Coat 2.5.
Pulled some masking tap off to check it worked and all good, although it did rip the paint edge in one place, prob due to it not being 100% dry. Classic impatience.
May need a new roller too, any recs greatly received.
1 Attachment