You are reading a single comment by @chiroshi and its replies.
Click here to read the full conversation.
-
I've used SRAM DOT grease on Hope pistons. I think any DOT grease should be fine. But I doubt that a sticky piston would cause you that much trouble. If you take the wheel out then there's enough room to walk the pistons all the way out. then you can take a good look and work out if it's really that or a different issue.
I'm having troubles with one of my Hope E4 calipers. During my last ride, the front caliper seized up and after pushing the pistons back on the trail I was able to limp home with out a front brake. I cleaned the pistons and lubed them with some silicone lube. Hope recommends some hunter lube which I can't get in Germany at the moment, so I used liqui moly silicone lube. However, the pistons still don't fully return. Any idea what's going on?