-
Been told not to use normal grease as that can cause the epoxy to to swell.
EDIT Thought it was a carbon frame and seat post hence using carbon assembly paste.
Got an on one lurcher that I've just bought a hope bolt on seat clamp to replace a quick release. Got some carbon assembly paste from Halfords tho not used it yet https://www.halfords.com/cycling/bike-maintenance/bike-lube/halfords-carbon-gripper-paste-10g-651233.html
@MCamb are some model hope clamps better than others?
@ectoplasmosis direct from superstar?
My seatpost (31.6mm) keeps slipping. I am using a Hope clamp (35mm) and grease (carbon with particles) and my post still slips.
I cleaned the post with isopropanol, cleaned the seat tube with isopropanol. Applied a small amount of regular (white) grease on the inside of the clamp, alligned with the slits in the back of the frame (seat tube). Added a drop of loctite to the clamp-bolt. Greased the post generously with (carbon) grease, torqued the clamp to spec and... this mofo still keeps slipping.
Any ideas on a sturdier/better clamp? Maybe using (even) better grease?