You are reading a single comment by @mcJ78 and its replies.
Click here to read the full conversation.
-
I’d rip the felt off to let the boards dry out and bang up the sheets. It’ll be fine.
-
There's a guide somewhere - possibly linked to in this thread about using flat roof torch-on roof flelt.
I picked up a slightly damaged excess rolls of ebay cheap. It's much thicker than "shed" roof felt. You don't have to torch it on or anything.
Chaley
hugo7
@mcJ78
Got 2 old sheds that need the roofs doing - not big, I was going to replace with corrugated pvc type stuff - can I just bang this right on top of the old wood & felt? I think the chipboard underneath is a bit damp but dont; want to start ripping it all to bits if I don't have to