-
You can use any centrelock lockring on any centrelock hub. There are however three things you should be aware of.
Some forks have very small clearance between the disc and the fork leg, so you may need to use low profile or 'internal' type lockrings.
Similarly, some axle endcaps (depends on whether you have thru-axle in 12mm or 15mm, or QR) necessitate an 'external' type lockring.
There is no standard for the little indentations on the faces between the lockring and the rotor. Most lockrings work fine with most rotors though. (Josh Ogle from Ogle designs dug into this once, but I don't remember the exact outcome).
chiroshi-
Cheers - the frame has 12 x 100 and 12 x 142 thru axles
-
Josh Ogle from Ogle designs dug into this once, but I don't remember the exact outcome
I think this?
http://www.peterverdone.com/ogle-center-lock-rings/
ghostface
kiskubai
I have some DT Swiss 240 centrelock hubs. Can I use any lock ring on these wheels or do I need to use a DT Swiss lock ring?