You are reading a single comment by @Chaley and its replies.
Click here to read the full conversation.
-
Put a straight edge across the face of the head tube and the top of the bearing race will be below it, fit spacer to fill the void, put back together play is gone. Or fit the original conical top, which I’m sure you don’t have.
99% sure that’s the answer
Chaley-
Yeah that is right for the bottom bearing, where do I put the bearing spacer? Do I put the spacer between headset outer and the frame to bring the bearing lower to meet the fork crown.
@gbj_tester the bottom bearing seems to high in the frame to actually meet the crown race on the fork
Overuser155208
Anyone know what these bearings could be