Paul, Spa, King, Shimano, Nitto, Other.

Hi all,

Post is fine, pickup beats post. Im based in Ealing and I dont travel far for work.

1. Black (black with black logos) Chris King Nothread headset. 1-1/8th. Lower cup has a bit of bag scrach for about 1/4 the diameter of the cup. Despite being used, its buttery. Inc race and top cap, but I lost the bolt. Looking for £80.
   
   

2. Paul Canti Lever. Some light scraches on the RH blade along the inside edge, and a tiny scrach on the clamp of the LH clamp. Lovely levers, moved to hydros. £100

1. Shimano 11 speed 105 flat bar mini groupset. Including a long cage 105 rear, 105 double front, RS700 shifers and 11-34t cassette. Good working order (rear derealleiur is scrached a bit), just used. £70

2. Specialized drops. The shape that isnt a smooth bend. CTC is 44cm, centre of bar to end of drop (when viewed vertically) is 11cm and 13cm drop. £10

5. Spa road fork: https://spacycles.co.uk/m21b0s29p2625/SPA-CYCLES-Carbon-Alloy-Audax-Road-Fork . Has 23.6cm of steerer left. Spa reckons they are worth £130, I reckon they are worth £40. Clears a mudguard and a 28C tyre nicely.

6. FSA Omega crankset (46-30) with BB. BSA threaded, 68mm etc. Was on my wifes bike, then was on one of my bikes for a while. Was shifting fine when I took it off, 30 is showing more wear than the 46, but both work fine. £30

1. 1x Tektro Mini V's (1 end). Wonderful brake. well used, little rough. FWE pad holders with some kool stop 3 compound pads in them with life left. Forum donation.

2. 2x Suntour XC Pro RH thumbshifers. RIGHT HAND ONLY. 7-8 speed (indexed) many speeds friction, working wonderfully, bit beat up. £15 each? Great for a friction 1x.

3. Shimano SF-MX30 18tooth. Used for about a month. £15

4. Tektro cantilever brake (1 set) with POWER HANGER. Honestly the only way I have ever got them to feel good for me. FWE holders with used but still loads of life koolstop 3 compount pads. £10.

5. Avid Single Digit V brakes. 2 sets (front and rear). No noodles nor pad holders. £10.

12. 4x King Cage USB. I imported these into Australia at great cost about 1000 years ago. Therefore they must be worth millions. Comes with a bonus Black BBB bottle cage because I cant find my spanners. £10 for all of them.

13. Thompson Downhill flat barsm 800mm wide, 4 deg up, 6deg back. Comes with some black ODI grips. £30

1. Massload CL-KA56. Really usefull, quite heavy. £5

2. Miche 27.2 seatpost. Black. Used, some scraches. Chiude lock is broken (they always are) 10cm of insertion above minimum line, centre of saddle rails to minimum insetion line is 20cm. £10

3. no brand 27.2 setback seatpost. Identical to the hope carbon one. Rails to bottom of post is 33cm, quite used. Anodising is worn down a bit round where it was clamped, and theres a scrach in the back, in the same area. £10

4. Driveline 60T 130BCD chainring. Used to have this on my 2spd brompton, was great. Dirty, but in good nick. £10

5. Sram Apex mid/long cage. Little beaten up. £15

6. Microshift 2x front derailleur. Came with an apex groupset. dirty but functional. £5

7. Shimano Ultregra 6800 Front deriallur. Looks good, limit screws are a little crusty. £10

8. Fizik Aliante R7 Saddle. Brand spankers. £15

9. Bright Red Charge spoon. Dirty and used, but not torn. £10

23. BNIB KNC X10SL (114 links). £15

1. Shimano HB-M6000. Centrelock, no skewer. Laced and used breifly. £7

2. Shimano BH-4600. no pads, nor holders. Forum donation.

26. B&H Luxos Lumotec IQ2. This was really cool, beacuse its got the dynamo charger built into it. Works. £40

27. Nitto (?) Bullmooses. Theses were sold to me as Nitto, but there are no markings. That being said, they are really well welded and are either hard anodised or dull cromed. They are 100% steel, 710mm wide, approx 3-4cm effective stem and 9cm rise. Guessing around 12-18deg backsweep. The finish and welding matches the set of bullmooses in #28 that are marked nitto. £40

28. Nitto Bullmooses. These are similar to the ones above, but way less sweet. 9cm rise, 68cm wide, approx 7-8cm effective stem. guessing around 6deg of backsweep. Weird thing is, the bit between the two "stem bits" is straight. I liked these more than #28. £40

Ive not put up any pictures. If you would like pictures, happy to post them.

Is that Thompson bar 31.8mm clamp? if so, dibs
*tip0h

No 28 bullmoose pls

I'll take No 26 Lumotech

And second on 28 Bullmose

I'll take the 23 KNC X10SL

I'll take the king cage usb. Sending dm

2nd dibs 26 pls

Dibs 2 - pm

Dibs 5

Y'all have some fast fingers. Ive replied to PM's and PM'ed. If its crossed out and you havnt got a PM, Im sorry, but life is tough sometimes.

Edit. My fancy use of strikeout has ruined the list. Maybe just write which one you want.

Dibs on CK 1 1/8

Which 105 is the flat bar group - R7000 or R5800?

One XC pro thumby please (posted).

Possible interest in 'no brand 27.2 setback seatpost. Identical to the hope carbon one' and maybe a red charge spoon...

Pics of these would be great ...

I've got a set if you still want some

R7000, can get pics tonight

Will send pics tonight also.

Cheers. Thanks for deciphering my message after replying to the wrong post... 😉