You are reading a single comment by @hugo7 and its replies.
Click here to read the full conversation.
-
I went to B&Q as it was convenient, I'm sure you could go cheaper. I also could only get 3m cladding boards so there was a bit of wastage.
7x pressure treated T&G cladding (119x14.5x3000mm) @£9.64 = £67.48
2x PT 2"X3" @ £6.97 = £13.94
Lock - already had but about £15
Hinges - £20
Clutch Head screws - £10
Oval nails - £2
Decking oil - about a quarter of a tin - £7
So about £140. Likely can get a gate cheaper ready made, but I wanted to make this (and I could only really do it today or it would be delayed enough I don't get around to it) and it meant I could make it whatever size I wanted. Plus I used better fixings than you get in the pre made gates.
stevo_com
@hugo7
Looking good.
We need 2-3 outdoor doors for our brick shed.
Don't suppose you have a materials list and a rough indication of cost?