Last night I was fucking around with this 1940s/50s Luxor light.
I’m going to cram in the innards from a Busch and Müller Seculite Skully gave me, but I had to make a new mount and way to secure the lens.
It was brilliantly frustrating.
Think I’ve nailed it.
Edit: I realised this post isn’t clear, I made (fabricated is definitely too posh a word) the little ally bracket from some tube I had.
I flattened it, bent it, drilled and tapped it. It replaced the original Luxor incandescent bulb holder which the red dome bolted to, I re-sized the original bolt to M4 (it was close already and I had an M4 tap and die)
There is now enough room for the gubbins from the busted B&M rear light and the red dome is held in place.
Only took all fucking evening!
Which one of those photos actually contains the new innards?
If you've got the old brass terminals that the seculite used sticking out somewhere, bring it round to test cos my silver Yates has the plugs at rear for them sticking routed through the rack...
Last night I was fucking around with this 1940s/50s Luxor light.
I’m going to cram in the innards from a Busch and Müller Seculite Skully gave me, but I had to make a new mount and way to secure the lens.
It was brilliantly frustrating.
Think I’ve nailed it.
Edit: I realised this post isn’t clear, I made (fabricated is definitely too posh a word) the little ally bracket from some tube I had.
I flattened it, bent it, drilled and tapped it. It replaced the original Luxor incandescent bulb holder which the red dome bolted to, I re-sized the original bolt to M4 (it was close already and I had an M4 tap and die)
There is now enough room for the gubbins from the busted B&M rear light and the red dome is held in place.
Only took all fucking evening!
7 Attachments