You are reading a single comment by @AmnesiaSpecialist and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@AmnesiaSpecialist
I apologise if I'm resurrecting an old thread but it seemed like the best place to ask this question.
I recently decided to build up an old cca. 2018 Bowman Palace:R I had lying in storage. When I popped in the rear wheel I noticed it wasn't quite centered i.e. roughly 1.5-2mm off-center toward the drive side. Tire clearance is fine though with a 25mm GP5000. The wheel has been checked and it is 100% dished correctly and fully inserted into the dropouts.
Could any previous or current Palace:R owners chime in if this is normal for the frame or am I left with a slightly janky one? On a related note, should I expect the frame to perform normally or could this level of misalignment cause any shifting issues?
Many thanks in advance!
2 Attachments