You are reading a single comment by @coventry_eagle and its replies.
Click here to read the full conversation.
-
Look likes the spider is pretty close to the BB cups with the spacer?
AFAIK you don't use a spacer as they use a wavy washer to take up the slack.
Maybe double check the assembly order based on the manual +fredtc supplied?
coventry_eagle
I assembled it with no spacers then held the pedal end of the crank and gave it a bit of a wobble inwards towards the chainstay. I felt a slight knock.
Thinking this might be because the axle is meant for a wider MTB bottom bracket i added one of the supplied spacers and the cranks don’t spin freely.
I’ll have another go tomorrow, I’ve just rushed a lacquer coat over the decals and ballsed that up so can’t touch anything for a while.