You are reading a single comment by @Dibble and its replies.
Click here to read the full conversation.
-
If the cranks were mtb size they’d be wider not narrower so should spin more freely
What’s the crank model? I’m not sure gxp bbs work with all praxis cranks
-
The bb spacer is too wide? Is it your 2.5mm ht2 type? Maybe try and get a thinner, metal shim washer?
As for torque, horse it up, the bolt on gxp style cranks isn't preloading the bearing, it's just holding the arm on so don't be shy.
-
Photo?
-
I feel like I could be wrong here but Sram gxp BB? I've always thought that Praxis Cranks need Praxis BB.
The linked above says these are the compatible ones: Praxis Works M24 - BSA / BB86 / BB30/PF3
Ignore if you've thought of this.
fredtc
M_V
coventry_eagle
c*j*f
@Dibble
SRAM gxp bottom bracket. I fitted it (with preload washer) some Praxis 1x cranks in a 68mm bottom bracket shell. The cranks had some knocking type movement so I refitted the bb with one spacer (thinking the cranks might be some MTB size.
The cranks don’t spin completely freely.
What’s right?