You are reading a single comment by @Thankshallots and its replies.
Click here to read the full conversation.
Thankshallots-
Only no holes as previous owner had used a putty to fill them.
Managed to get most of the putty out pretty easily. I emailed carbon bike repair about bonding on some cable stops but they're not able to do it (liability). I could probably do it myself, but it would be ugly af.
Can't really afford AXS and 11 speed etap seems to be almost as expensive 2nd hand.
So going to go di2. Going down to LBS tomorrow to remove the BB bearings to see if the di2 battery holder is still in the frame. If it is then happy days, if not will have to come up with some sort of solution to hold the battery in place.
Got some 55mm Light Bicycle / Hope wheels for it, an integrated carbon handlebar (50/50 if I actually use it). and most importantly, this saddle...
boomboom
This turned up in the post yesterday.
Sorry for thread hijack, this was the closest i could find to a time thread. I don't think there is one?