Stans Crest S1 rims / Stan's Neo rear / SP Dynamo front hub / Sapim Race wheelset
These are new and unused, were fitted to a new bike I bought, but I'm going down the 650b route for the build (and I can't pull off red ano in the way that @launchpadboi can) so....
23mm internal, taped up with Stan's tape, valves included and fitted, they're airtight - ready to go. Currently set up as QR front and rear. The end caps on the Stans hubs can be swapped for thru/boost etc if needed. Would make a good qr gravel wheelset, or nice light wide commuter wheels.
Take an 11sp cassette, 6-bolt rotor fitting
Cheapest I can find these new is £350ish without the dynamo, I'm asking £220 collected from Camberwell, SE5. Can post at cost if there's no local interest, estimate £20 or so...
Don't worry about formatting, just type in the text and we'll take care of making sense of it. We will auto-convert links, and if you put asterisks around words we will make them bold.
Tips:
Create headers by underlining text with ==== or ----
To *italicise* text put one asterisk each side of the word
To **bold** text put two asterisks each side of the word
Embed images by entering: ![](https://www.google.co.uk/images/srpr/logo4w.png) That's the hard one: exclamation, square brackets and then the URL to the image in brackets.
* Create lists by starting lines with asterisks
1. Create numbered lists by starting lines with a number and a dot
> Quote text by starting lines with >
Mention another user by @username
For syntax highlighting, surround the code block with three backticks:
```
Your code goes here
```
Just like Github, a blank line must precede a code block.
If you upload more than 5 files we will display all attachments as thumbnails.
Stans No Tubes Crest S1 29er Dynamo Wheelset
Stans Crest S1 rims / Stan's Neo rear / SP Dynamo front hub / Sapim Race wheelset
These are new and unused, were fitted to a new bike I bought, but I'm going down the 650b route for the build (and I can't pull off red ano in the way that @launchpadboi can) so....
23mm internal, taped up with Stan's tape, valves included and fitted, they're airtight - ready to go. Currently set up as QR front and rear. The end caps on the Stans hubs can be swapped for thru/boost etc if needed. Would make a good qr gravel wheelset, or nice light wide commuter wheels.
Take an 11sp cassette, 6-bolt rotor fitting
Cheapest I can find these new is £350ish without the dynamo, I'm asking £220 collected from Camberwell, SE5. Can post at cost if there's no local interest, estimate £20 or so...
5 Attachments