.

.

Just lamenting the fact that this week I paid £186 (on sale) for the H36 version of this from Canyon and thought it was a good deal. Please have a bump for a GREAT deal.

Hi are these bars still available? I have ben hunting for a while.

Want. Glws

Bump for a great seller 😁

I'd be all over these if they were 410mm. Great price, GLWS.

Bump. £115.

£100 without out front mount

Hi - could I grab the wahoo mount

Now £100 and includes the out front mount.

Hey mate does this come with spacers and top cap etc? Cheers

No top cap but i do have some spare spacers.

I think I may know the answer to this already but... Would they fit a Scott Addict RC40 - 2021 model (fully integrated cables)?

Not sure.

Canyon fork steerers are 1 1/4" and assume your Scott Addict RC40 is 1 1/8, and if so needs a shim I think?

BUT I just looked at the website and it says FORK Addict RC HMX Flat mount Disc
1 1/4"-1 1/2" Eccentric Carbon steerer, so you can simply use it this I believe.

https://www.scott-sports.com/gb/en/product/scott-addict-rc-40-bike

Hmm.. Sounds promising. I'll remove the top cap and see if I can get a measurement from the fork. How are the canyon bars measured - I've attached a jpg showing the Syncros bars dimensions

1 Attachment

Not sure but happy to measure them as per this drawing for you?

Thank you :)

On the side of the stem it states from Canyon. Width 430mm. Length. 120mm. Reach 70mm. Drop 128mm. When i try to measure with my tape measure (not that accurate!) i get Width ctc 440mm. Reach 85mm. Extension. 120mm. Drop 155mm.

Hope that helps.

From experience, they do fit, though the spacers don't match. But if you're running it slammed you can do a bit of dremel/sanding work on them and then cables go in from the channel below the stem section straight into the bottom most spacer (which acts as the top cap as well). I could model up something new to be printed if of any use.

Thank you, but I think they will be too long for me. My current Scott bars/stem are 110m/75mm - and I think 120mm/85mm will be too long for me :(

Hey, I am not sure if I was measuring them correctly TBH and not as accurately as what is printed on the side of the stem by Canyon. I would take a punt on them at this price and if they are no good you would not have a problem selling them on!

I get what you're saying - however, I'd have to get the bars switched over at the local shop (my bike is disc (hydraulic) - which would cost ££, and if they're the wrong size it'll cost me again to put my old ones back on...

Yeah understood.

Thanks again - It's good to know that there is a viable alternative to the Scott bars though.

.