Wanted: 1 inch carbon fork

Ideally want to swap my 1 1/8 inch unthreaded dedacciai carbon fork in good nick for something similar but with 1 inch steerer. Or will consider buying one if the price is right.

has to be drilled for the rim brakes.

TIA,

How long do you need the steerer to be?

not particularly long- 200mm should do just in case I need to trim it a bit.

I’ll have a dig around tomorrow, I’ve got a pair that I bought off eBay for a frame I’ve got but at some point a previous owner has over torqued the stem clamp on the carbon steerer* which meant I couldn’t use it.

It could well be above where you’d require so you could cut it down and remove it at it might still fit.
I’ll find, measure me take some photos tomorrow.

*noticed too late to send back.

Thanks a lot. Appreciate it. Dm me please with pics when you dig the forks out. cheers

What kind of budget are you working in? I have an almost-new Columbus minimal 1" carbon fork but I don't know whether that is fancier than what you are looking for.

Uncut steerer? Out of interest and if OP doesn't fancy it...

Need something relatively modest and on a very modest budget so your’s definitely going to be too fancy for what I’m after knowing what those go for these days. Thanks anyway!

Also maybe interested!

got something here with a fairly long steerer. A profile design with alloy steerer.

Thank you for your reply. I’m waiting for furious_tiles to come back to me but dm’ed you for few details regarding your fork. cheers

I'm not actually sure, but in any case it has a decent amount of length left. PM me if you're still interested, but I'll have to dig it out first.