-
We have an Epilog Zing at work which I've used a bit. The software is easy enough and it handles 4mm ply in a single pass. I've found the zero positioning a bit fiddly, and there don't seem to be any limit switches to stop the motors running the gantry into the end of the rails. They have updated all their systems now though, so maybe they fixed a few of the niggles. I expect it is quite an expensive system though.
chiroshi-
Thanks, that's a good place to start - looks like that's the fusion edge 12 now, looks like they're landing in the £10-20k range which is more than I can just whack on the company card!
From there, I'm now looking at the Flux Beamo and FSL Muse Core.
In our lab at the mo, we've got a Raise 3D for FDM - this is working well for us and adding value so I'm looking for something at a similar level
Rik_Van_Looy
Slightly off-topic, but does anyone have a recommendation for a laser cutter.
I'm looking for something that can cut 3mm MDF up to about A3 size for prototyping and production jigs. Needs to be fairly quick and easy to get up and running with minimum faff and reliable ongoing usage