Current Projects chat and miscellany

You are reading a single comment by @gbj_tester and its replies. Click here to read the full conversation.

•

Vince

Some progress on @cake old Pinarello.
Cables & pedals added.

Fitting a 3 × 9 groupset I had lying around unfortunately the wheelset is a Shimano 105 on Araya clinchers. The RH-1055 is 7 speed only, original HyperGlide so can't take a 9 speed cassette.

I'll be looking for a replacement wheelset unless someone wants to swap.

•

gbj_tester in reply to @Vince

The RH-1055 is 7 speed only, original HyperGlide so can't take a 9 speed cassette.

If it's FH-1055 7-speed UG/HG, it's 126mm OLN. I'd probably keep the hub and modify a CS-HG50-9 cassette to make it 8 sprockets at 9-speed spacing.

•

Vince in reply to @gbj_tester

Thanks Tester - I had read something like that on SB.

I am looking to fit a 9 speed cassette so I believe I can use 10 speed spacers but will have issued with the pre-spaced 2 smallest sprockets.
Or just 9 sprockets of a 10 speed cassette...which I don't have!

About

Avatar for gbj_tester @gbj_tester started