Hacks / Bodges

Posted on
Page
of 144
  • Hah ! New page fail.

    Balance bike ? Wheeeeeeeeeeeeeeeeeeeeeeeee

  • Im already at home, and this is why it pays to have more cargo bikes then you technically need

  • But in this case you did technically need it?

  • Dropped the rubber ring which is used to keep these lights on when I put it in my bag earlier. Fortunately I still had a bunch of covid masks in there, so bodged a way of keeping the light on.


    1 Attachment

    • IMG_20230215_090030.jpg
  • Wanted to reuse an old kickstand on my beater -but was too short so extended it a bit


    1 Attachment

    • 0727C33A-BAE8-4A16-8CDB-399BB6C0AAE2.jpeg
  • An anti zip tie attempt with scrap piece od metal. Was fitting fenders on a trek multitrack without chainstay bridge.
    Also, I’m not entirely sure what are the bolts for originally. Is it a bracket for chainstay protection?


    1 Attachment

    • 62401C0D-C7F2-4BD2-A8E1-708E2CFBA768.jpeg
  • Also, I’m not entirely sure what are the bolts for originally. Is it a bracket for chainstay protection?

    Anti chain suck plate so, basically, yeah.

  • Not a new hack, but this particular combo amused me - Magic Milk sealant in a transparent Shwalbe Aerothan inner tube. Felt like I was putting a used condom in my tyre.


    1 Attachment

    • 2023-02-26-10-46-40-383.jpg
  • Front light bodge using some spare rack mounting hardware after the rubber strap snapped. That was then re-bodged using double-sided tape and a couple zip ties as the mounting hole has stripped. Working amazingly until the light needs charging, then I need some kind of QR solution


    1 Attachment

    • IMG_1502.jpg
  • Reusable zip ties? Or just new zip ties. Or maybe hook and loop straps.

  • Good one today


    1 Attachment

    • 503357FC-CF6D-4D5E-BF6B-EC0ADACCF2C0.jpeg
  • That's great.

  • Was being a cheapskate and didn't want to spend £20 on a handlebar holder, so bought a 1 meter brass rod (initially I thought mild steel but brass was cheaper on eBay this time round) for £8 posted, added a bit of shrink sleeve, and this seems to work fine...


    1 Attachment

    • 20230407_182649.jpg
  • If I had to do it again, I'd use 5mm rod instead of 4mm


    1 Attachment

    • 20230407_192505.jpg
  • Hmm. How did you bend it?

  • I have one of these small pipe benders


    1 Attachment

    • SmartSelect_20230407-221104_Samsung Internet.jpg
  • Nice, but I'd only bust this thing out on the odd occasion there was actually a reason to hold the bike level...

  • J'aime beaucoup !

  • cool. added to my 'need to make one of these' list

  • Can someone tell me why people don't just point the bike down in the stand to prevent the wheel flop?

  • When bleeding brakes maybe?
    Obviously not the case in this picture

  • Yeah when bleeding brakes it’s handy. A toe strap through the wheel and round the downtube does just fine though

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Hacks / Bodges

Posted by Avatar for Thrasher @Thrasher

Actions