-
-
I do this job very little because I don't do a building site work and builders all reckon they can paint anyway!
The piece of old timers advice I do have is to let it dry for 6 months. This advice is universally unwelcome! In any case a mist coat is the way to go. Some emulsions have higher amounts of solids in them, usually trade paints do, so choosing a high opacity trade paint for the following coats is helpful.
Give it as long as possible to dry, plaster is a crystalline structure that is still forming for a while after mixing.
It also makes a big difference how well it's been plastered, plaster should have a final polish when it's just drying that creates a very smooth finish. Most of the time if you put a bright light across a newly plastered wall you see multiple faults. I'm usually fixing all that 10 years later!
-
Deluxe trade supermat white watered down
-
My mate who has been a decorator all of his life gave me this advice once (and I have always used this method since with zero issues):
"If it hasn't been painted you need to put a mist coat on it (which is a watered down coat). It needs to be like coloured water (It will go everywhere!!!)
Ideally it needs to be a paint with out plastic in it, so a Dulux super Matt.
For the final coats you need somethin with plastic in it, like a vinyl Matt. I personally only use Dulux. "
You are reading a single comment by @Tenderloin and its replies.
Click here to read the full conversation.
umop3pisdn
Airhead
Mr_Smyth
eskay
@Tenderloin
Painting freshly plastered bathrooms. What’s the defacto guidance - emulsion mist coast and then dulux eggshell? Looking at @Airhead for his master guidance 😃😃