You are reading a single comment by @Cupcakes and its replies.
Click here to read the full conversation.
-
Also, internal rear brake routing is on the wishlist but may or may not be practicable.
How would you go around the BB? Even with a T47 BB I found you need quite accurately drilled breather holes to have enough space for the hose to make the bend around the BB.
-
:)
Seem to be pretty short stays for those clearances?
chiroshi
Tijmen
@Cupcakes
Here's a bit more progress and designing-out-loud.
I have asked @Tijmen to make some bags for this, as I am very happy indeed with the ones on my gravel bike.
I am really intrigued by the mini rack-bag setup used by Tomii cycles on their Canvas / Fat Canvas bikes. However this is likely a step too far for my upcoming course, as I won't have time to pursue making a rack as well as the frame and forks. I plan to add some eyelets so that I could go down that route in the future.
In the meantime this led me to some thinking about which bags are actually most useful, and my conclusion is a combination of the classic half-frame bag and top tube feed bag. I've mocked up a render of these.
Also shown is my plan for a stainless cable rub bar on the headtube. Also, internal rear brake routing is on the wishlist but may or may not be practicable.
1 Attachment