You are reading a single comment by @Josē and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Josē
I have a 90s Moser Sprinter for sale. Aluminium frame with steel fork. I bought this from ebay about a year ago, rode it as a winter bike and to commute occasionally. Have swapped to a frame with mudguard mounts so I don't have a use for this.
Threaded 1" steerer. Tange Levin headset less than a year old. Seatpost 55cm centre to centre, 59cm centre to to of seat clamp. Horizontal top tube 56cm centre to centre. 27.2cm seat tube. Clearance is tight, I squeezed a 25c up front, 28c would fit the rear. Rear hanger threads chased. Braze on front mech. All cage bolts and BB gear cable guide. Campagnolo Mirage ISO square taper BB fitted. I don't have the tool to remove it. The downtube bosses bolt together like old Cannonndale frames, one snapped but had enough thread to do back up, no issues since.
Metallic red paint in ratty condition, a few patches missing (bought it like this) and some bubbling by the front cable guide. No dents though, and eye catching in the light!
In Aberdeen so expecting to post, £40 all in if you're interested. Have a box with heaps of packaging, braces for dropouts etc so can send ASAP
5 Attachments