You are reading a single comment by @Mucker and its replies. Click here to read the full conversation.
  • I've done two different boxes:

    1. Downloaded cad file from German cargo bike forum, sent to laser cutters in Shoreditch and they cut the pieces to size for £168 including the wood. The box is push fit together pinned with screws, but I fixed the bottom front and back and then used a ratchet strap threaded through to keep the side panels on, the design also includes panels to make kid seats.

    2. Made base board out of HDPE sheet with a jigsaw, you could also use ply, friendly forumer 3d printed these awesome brackets for side panels and I just cut a spare bit of ply to size for the sides.

    Green bike is option 1, pink bike is option 2.

  • Love your electrified Bullitt's. I'm about to go down the Bafang rabbit hole. Thinking BBSHD and 52v battery under the load bed.

    Have you looked into the Egg controller?

  • Missed this, sorry. I've got a template that I found online for a battery holder under the load bed that I can send.

    Had to google egg controller, looks interesting, will have to read into it a bit

About

Avatar for Mucker @Mucker started