You are reading a single comment by @Nef and its replies. Click here to read the full conversation.
  • First question in my mind is why is the red sleeved wire connected to earth. That is the last colour I would want earth to be shielded with.

    Also seems likely to me if you have one wire for HW call for heat and one for CH call for heat you want to connect those to terminals 3 & 4 HW On & CH ON.

    But if that red sleeved wire really is earth, please get some yellow and green tape or sleeving to cover it with.

  • From what I can make out, the red sleeved conductor was originally on "Heating - normally open", deffo not the earthing point.
    Not sure how that translates to heating on or off though.

  • I couldn't turn my head sideways long enough to work that out. It's an ambitious attempt at rewiring for sure.

  • This is what I found strange so I’ve just earthed that to the unit.

About

Avatar for Nef @Nef started