You are reading a single comment by @JVBulman and its replies. Click here to read the full conversation.
  • Annyone on here familiar with "532 error" on Bosch Powerpack frame battery? I'm pretty certain it's corrosion or dirt on the male plug where battery fits. I've had issues every now & then where power just cuts out, or Intuvia display starts flashing on/off. Brushing terminals with wire brush seems to work for a while. Wondered whether electrical contact spray might help? Also, if this is an issue with others, might be good to have a cap to go over terminals when the battery is removed

  • 532 is technically a DU error iirc, but it's always the battery in my experience. If you have access to another powerpack, I'd install it and see if the issue goes away - that will tell you if the issue is isolated to your powerpack specifically and you can go from there.

About

Avatar for JVBulman @JVBulman started