You are reading a single comment by @stevo_com and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
stevo_com
Airhead
Tape the edges and paint the back (with a roller) primer/undercoat and 2 top coats. Then when they are fully dry tape the back at the edges and roll the front and the edges at the same time.
Try and get them up on painters trestles or anything rather than cones, it's so difficult to do the edges when they're that close to the floor. If you set up 2 trestles and a couple of pieces of 2x2 pine you will find it a lot easier to get it done.