You are reading a single comment by @miloas and its replies.
Click here to read the full conversation.
-
No, not at all. It'll pull the cable, but won't click into place at all
This is 12 speed chorus and is brand new out the box, so I'm hopeful isn't a fault. I've also just installed the cables and internal routing etc., So really hoping I don't have to redo that!
miloas-
Its not unusual for a shifter to not engange if there is no resistance to the cable so i assume you mean you are pulling on the cable while shifting but it still wont click..
Then you would need someone to look at it :/ try to make sure it still behaves the same with the hood off so you are certain its not some annoying easy fix..
badboybjorn
Dissengage cable from front derailleur.
Shift the lever whilst pulling the cable with your hand (providing resistance). Will it click and engage while "pulling" ?
If it does not click and engage its faulty or something is interfering with the spring. If it does click then its okay.. Sometimes on 10s levers the hoods could interfere with shifts but that was usually when using the thumb button as i recall. Was easy fix just tuck the hood into possition again.
Now if the lever does shift and click when u pull the wire by hand but its not enganging when installed on the front deraileur. See my post above on the limit screw..