-
Do you have the hoods on the brifters rolled forward ready to tape the bars? A friend of mine was trying to set up his shifting with his hoods like this, it interfered with the shift paddles and drove him to the verge of insanity because he couldn’t get things indexed properly, rolled the hoods back and everything worked fine. Just a suggestion
-
If the front derailleur limit screw is set before the shifter will engage and lock the "click" the shifter will only move the derailleur until its forced to stop by the limit screw and then fall back since its not enough to engage it to that possition. If thats the case you need to back out the limit screw on the front derailleur.
If there is no tension on the cable why would it click into the big ring?
You are reading a single comment by @miloas and its replies.
Click here to read the full conversation.
user68025
badboybjorn
@miloas
The fun continues: i'm trying to sort out the front derailleur whilst i wait for some hardwear for the rear to turn up.
For some reason, the left hand shifter won't 'click' when i change up into the big ring. It'll pull the cable, and move the front mech cage as if to move the chain onto the big chain ring, but it doesn't 'click' into place, the mech just falls back down to the inner ring. Even without tension on the cable i'm unable to click into the big ring. Any ideas?