You are reading a single comment by @grams and its replies.
Click here to read the full conversation.
-
All the loads are fused, I’m thinking the onboard BMS is the culprit.
I did check the battery protect and it’s set to disconnect loads when the voltage drops below 12v, which hasn’t happened according to the log, but I can set it to 10v and then see if I still get the switch off, in which case it’s likely to be the BMS I think?
Dammit
@grams
Either you’ve got an intermittent short somewhere or a dodgy battery. Neither seems particularly likely though - the short would have to be somewhere where it didn’t blow a fuse.