You are reading a single comment by @stevo_com and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@stevo_com
This is the scale drawing. Pen is pre-replaster, pencil is after. Not much change but enough to warrant redoing the design from scratch.
The alcove on the right is 1010mm, and the unit to slot in there (well ,all units) is 769mm so it will easily fit. Same on the other side, 1580mm alcove, 1538mm for the two units. Whole room width is 3945mm, all 5 units equals 3845mm. So there's 100mm of space to play with/scribe in fills for.
Height wise, the double stacked tall and small units equal 2540mm including feet. Room is minimum 2680mm tall, so have 140mm to play with there. Could raise the feet or have a taller in fill along the top.
1 Attachment