You are reading a single comment by @christianSpaceman and its replies. Click here to read the full conversation.
  • Looking at ripping out the old smelly carpet and sanding the floorboards in the house we've just bought.

    Has anyone used draughtex https://www.draughtex.co.uk/ for sealing the floorboard gaps ?

  • Has anyone used draughtex https://www.draughtex.co.uk/ for sealing the floorboard gaps ?

    I've used this, it did a good job, looked innocuous and was easy to fit. It took an afternoon for a 3x4m room. It made a really big difference. Get some knee pads before you start fitting it!

    I've since taken a (different) ground floor up and put wool underneath (I think that's what that youtube is doing), it took about two full days and was quite a lot harder - lots of broken floorboards, prying out nails etc - at several points I thought I'd made a big mistake even starting it :) Then hardboard over the top of the boards, laminate floor insulation foam (c.6mm thick) then laminate floor - this second stage took another weekend.

    There's no draught at all any more and the room is noticably warmer than the first room, but it took a lot more work.

  • There's no draught at all any more and the room is noticably warmer than the first room, but it took a lot more work.

    Make a big difference in delaying turning on the boiler, our gas bill now have a extra £10 to carry forward from the government as a result.

About