You are reading a single comment by @Foreigner65 and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Foreigner65
It’s time to admit that despite being custom made by me, for me, this is the wrong size.
The seat, head and fork crown lugs are Cinelli, the dropouts are Surly, all bought NOS for this project. Tubing is Columbus, mostly Thron as it was the best that was available in these old school diameters (25.4mm tt, 28.6mm dt). The seattube and stays are Zona I think.
Monostay/wishbone seatstays.
The seattube extends through the seat lug and the slot is within the tube rather than at the top. Could easily be trimmed back to the lug of this isn’t too your taste.
Brass headtube and P.H.T.L. (Pedal Hard Turn Left) badges.
Fork is drilled for a brake and tyre clearance is fine with 28s.
Takes a 27.2 seatpost, 1” quill stem, bb shell is 68mm bsa thread and headtube is 135mm long.
HTA 75
STA 74
Seat tube length c2c 54cm
Top tube length c2c 57cm
£350 posted to your door.