You are reading a single comment by @M_V and its replies. Click here to read the full conversation.
  • You are right I took it all apart this morning, and its a sort of tapered split ring to locate the stem in the bearing.

    Having cleaned everything thoroughly, re-greased and re-assembled I'm still really struggling to tension the headset in such a way that the forks don't move under braking but not so tight that the steering is binding. Any tips from anyone?

  • Sounds like you might be missing a piece or something.

    Can you post a photo showing a sort of 'exploded' view?

  • Unfortunately I have re-assembled it without taking a picture.

    However what I have is:

    At the bottom - just the bearing; the shells are integrated to the fork/head tube

    At the top (reading up)

    • bearing
    • Split ring thing
    • 46x4 low stack headset cover (from gbj_tester)

    Above that I have a steerer tube spacer; then the stem; then another spacer; then the top cap.

About

Avatar for M_V @M_V started