You are reading a single comment by @moocher and its replies.
Click here to read the full conversation.
-
When the needle raises from the lowest point, it creates a loop in the thread and the hook in the bobbin picks the thread up. So with that in mind you need to line the hook up to the needle when it’s rising. There should be a mark somewhere on your machine to line certain parts up. You will need to check the specs for your machine. I’ve only ever done this on old Singers, it’s pretty straightforward to work out if you can’t find the details for your machine.
Dogtemple
@moocher
Broken.
What position should the bobbin case be in when the needle is at its lowest?
1 Attachment