You are reading a single comment by @hvsds and its replies. Click here to read the full conversation.
  • After getting quotes of around a grand to add a ladder and board 10sqm of the loft, I’m going to take the plunge and DIY it.

    Plan is to counter-batten the current joists to give enough room for the insulation - but was wondering, for 18mm t+g chipboard, are 600mm centres fine for the battens they’ll sit on? Or is 400mm preferable?

  • Chipboard, or OSB? The former at 18mm is usually only rated up to 450mm centres?

    Edit: actually some T&G chipboards do go up to 600mm centres, seems to depend on the manufacturer.

  • I'd be looking at costing 18mm osb at 600 Vs p5 boards at 450.

    Taking up the 'loftboards' that previous owner had laid in lounge was a pig.

  • counter-batten

    Is this so you can fill the depth of the joists and then have a gap above? Which means you can vary the spacing.
    Or just batten on top of the existing joists (not 'counter')

About

Avatar for hvsds @hvsds started