You are reading a single comment by @zigbit and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@zigbit
A few changes to the cycletruck and a service ready for winter. I'd like to get it powdercoated, the rattlecan job isn't that durable and I've really gone off the colour, thinking an earthy green/mustard yellow, rusty red sort of colour. Aiming to remove most of the purple ano bits too, seatclamp has been swapped for a black Hope one so far. Cranks swapped for a pair square taper LX and an extra flap added to the rear guard. A grey/black box to replace the red one would be good too along with a dyno hub and lights.
The Dolan needed some 1" spacers for the steerer and I couldn't find any in the parts tub. I did have a length of the right diameter steel tubing though, so cut a 20mm length then hot blued it using a camp stove and a jar of veg oil. Going to call it a success. I'd like to make some matching steel stems over the winter so will start collecting bits for a stem jig.
4 Attachments