• Thanks, had a spare one laying about but no joy. I'll pop around the lbs at lunch.
    In another question, installed the front derailleur but two questions. At its lowest setting on the braze on, the gap to the large chainring is about 3-4mm, this is ok without leading to any catastrophic issues? I normally have band-on or run road chainrings so never had a Gap bigger than 2mm.
    And, do I need one of this backing plates for the front derailleur?

  • You don't need a backing plate in a metal frame, only if the bolt is digging on carbon.
    3mm will do fine

  • Cool, thought so. But I still need to dial the bolt in so it rests against the frame right?

About

Avatar for Netakure @Netakure started