Cannondale Aficionados / Owners

Anyone interested in my purple 12 frameset before I eBay? Need to raise some funds and can't have it hanging in the loft unused unfortunately. Pains me, but needs must.
Seem to be around £450-500 on eBay, can negotiate about the si cranks, 110bcd adapter and SRAM Red rings (which I sort of want to keep, but again, no real need). Includes the fancy seatpost.

Builds up super nice and it would be good to see it stay within the forum.

2 Attachments

Size please

Anyone got a 58cm 2.8 or early CAAD frame they want to swap for this T600 frame?

1 Attachment

Nice, way too small for me but that save post is £100+ I think I paid £130 for mine.

Ah no way. I can't remember what I actually paid for this as it was part of a swap I think. Can see below post is a bit scuffed but I always ran it with not much showing. I'm 182cm but quite short legged.

It's a 56 @scultura

1 Attachment

It's a caad12 fork

The supersix evo fork is similar too

W.I.P. New wheels from @Jgf . Cranks are a placeholder until I can find something nice in 165mm length. Most other parts robbed from various bikes in the household.

1 Attachment

V nice.

Has anyone see the Supersix EVO SE/CX Frame only sold anywhere in UK?

https://bikotique.com/2022-cannondale-supersix-evo-cx-se-frameset

Looks great so far

until I can find something nice in 165mm length

Good luck, i've been searching for something to replace my 165 R7000 crankset for a long time now (for no other reason than i want some flashy cranks). There's someone who i think was on here who sells through Ebay that has a really good selection of 24mm Rotor's but they're out of my budget. I've missed out on a few R8000 Ultegra's lately that have gone fairly cheap so might be worth looking out for some of those.

https://www.ebay.co.uk/usr/rossi46mo?_trksid=p2047675.m3561.l2559

Cheers. I had seen those Rotors and dismissed them for the same reason. Even 105 would be an upgrade, the RS510s are nearly 1kg!

Long time forum lurker...here is my current rig.

It's the 2018 SuperSix so has QR rear wheel and TA front, bit of a pain but I upgraded the wheels to Vision Metron 40. Decals removed on the rear.

11 speed Ultegra with 53/39 & 11-34.

Currently living in Windsor and training around the chilterns.

1 Attachment

windsor is actually pretty well placed for cycling. good access to chilterns and can do some longer rides into surrey hills (although bit boring from windsor through ascot, chobham etc.)

That's reminded me, I've had this sitting in my cupboard for two years. One of the best frames I ever did have until the derailleur hanger snapped and took the dropout with it. Apparently, it's a pretty easy repair so, one day, I'll get it rebuilt and have either a needlessly bling turbo or summer bike.

2 Attachments

I’ve had a pair of Cannondale Hollowgram SI crank arms on a sales thread (£80) for over 2 years now. They now come with a free Caad 10 frame and forks. Any interest here before I make a proper sales thread? Pick up / meet up London and cash only. Live south east. Work Bermondsey. Full transparency there is a very slight, very rounded ding in the top tube underneath my homemade top tube protector which I think was caused by the handlebars. I continued riding this bike with no issue and it was still able to drag me up French and Italian alps with no problems.——————————SOLD.

4 Attachments

Long shot but does anyone have an FSA BB30 threaded adapter removal tool (EE039) i can borrow? Ideally central/SE London. Got this about 15mm into a CAAD10 frame before paying attention to the spec

1 Attachment

Anyone selling or know anyone selling a Supersix Evo Hi-Mod. 2016-2018, rim brake only in 56cm?

I bought that tool, used it once and then sold it. Such a niche thing to need to hold onto and not exactly cheap for two tubes of steel. You could probably fashion one cheaper by buying a tube in the right diameter

i think i have a spare 68mm bb30 sleeve

Yeah crazy price for the tool. Measured up the shell and will order a 100mm tube with the correct ID and something smaller for the male inner. A mate has left me the parktool press we started the job with, really hoping my impatience to get it out/whacking it with a drift and mallet hasn't fucked the shell.

Great, if you find it i'll take it with the FD

found it !

Tis well placed for loops but not for living under the flight path to Heathrow!!!

I do have a loop down to Surrey, don't think it's too bad...

If anyone is after a 9 this’ll likely be in the classifieds soon

1 Attachment

Stealthy 🤤