just bought some new canti bosses for some cx forks. They come with little plates with the holes for the sprung little nodule. these seem to be held in place by the torque of the boss, you need to line them up by eye.
i might be wrong about this but my question is that undoing the canti bolt also undoes the boss from the fork? now i can’t get the boss out of the canti assembly. grr!
Stick some loctite in the threads that hold the bosses into the forks.
If you just want to get stuff apart now, wrap some innertube around the threads, clamp in a vice or with some big pliers and undo the bolt holding the cantilever on.
just bought some new canti bosses for some cx forks. They come with little plates with the holes for the sprung little nodule. these seem to be held in place by the torque of the boss, you need to line them up by eye.
i might be wrong about this but my question is that undoing the canti bolt also undoes the boss from the fork? now i can’t get the boss out of the canti assembly. grr!