You are reading a single comment by @sbbohr and its replies.
Click here to read the full conversation.
-
Fit the miniMODs unibody x3, 11-14-17t (use this for the 11t) with a 1.6 or 1.8mm circlip, onto a standard 2 speed hub.
You then use an 11 speed chain; and ideally fit a pre 2017 anchorage for ease, with a barrel nut on the end.
I use the Sunrace friction shifter because you always get good shifting; even if the chain pusher wears a little or the cable settles in, there are no issues. With indexed shifters I find you often get a lack of crispness to the shifting.
For 3 speed you do not need to make any adjustments to the derailleur or tensioner
1 Attachment
-
sbbohr
JurekB
More tech detail please, not just an overview!
How does 3 spd mod work; It's a 2 spd hub & dr right?
Thinner sprockets & circlips to squeeze it all on?
Why sunrace shifter?