You are reading a single comment by @Squircle and its replies. Click here to read the full conversation.
  • More tech detail please, not just an overview!
    How does 3 spd mod work; It's a 2 spd hub & dr right?
    Thinner sprockets & circlips to squeeze it all on?
    Why sunrace shifter?

  • Sprockets from a 10 speed (thinner) and a 10sp chain.
    Also, dedicated circlip (thinner)
    Sunrace shifter works well - it could theoretically be any bar mounted friction shifter.

  • Fit the miniMODs unibody x3, 11-14-17t (use this for the 11t) with a 1.6 or 1.8mm circlip, onto a standard 2 speed hub.

    You then use an 11 speed chain; and ideally fit a pre 2017 anchorage for ease, with a barrel nut on the end.

    I use the Sunrace friction shifter because you always get good shifting; even if the chain pusher wears a little or the cable settles in, there are no issues. With indexed shifters I find you often get a lack of crispness to the shifting.

    For 3 speed you do not need to make any adjustments to the derailleur or tensioner

  • Here ya go

About

Avatar for Squircle @Squircle started