No more frankenbikes - clearout of shite parts

Moving flat and I can no longer justify the existence of all these spare parts as sadly I don't really need to build cheap shitbikes any more. My username will simply serve as a reminder that I have betrayed my roots.

I'll post stuff or you can collect it in Edinburgh. Will be on holiday for a week from next weekend though so catch me before then or wait until after.

If things don't sell within 28 days I'll be taking it all to a local bike charity. So I'll accept literally any offer at that point, as long as it's worth my time to pack it up and walk to the Post Office. The more you take the happier I will be.

1: Miche Primato Syntasi hubs - 28h/rim brake/QR, but the rear bearings need replacing. Not even sure if they're 10 or 11 speed - £20 posted

2: Dura Ace SL-7402 downtube shifters - £18 posted

3: SRAM 10 speed TT500 bar end shifters - these will work with any SRAM road 10/11 speed or MTB 10 speed derailleur (obviously only with a 10 speed cassette though). Beater condition - one is missing the spring bit around the expander plug thing, but the electrical tape works surprisingly well - £19 posted

4: SRAM TT500 aero brake levers - for TT base bar or bullhorns or whatever - £19 posted

5: 3T Zero25 seatpost. You can flip the clamp around to give either 25mm or 0mm of layback - however, I'm 85kg with clothes and the seat clamp slips for me. So needs a lighter rider (or less clothing) - £15 posted

6: SRAM X7 shifter and derailleur. 10 speed, decent length cage but no clutch. Good for a 1×10 flat bar town bike or something - £26 posted

7: Tektro brake levers - I think one pair of RL-340, another pair of something else - £12 posted each pair

8: Nice Rival cranks, 170mm, with a (I think) 40t NW ring - £37.50 posted

9: Deore cranks, 175mm with a 30t NW ring. I sanded the ano off these by hand but it took bloody ages so I got lazy and didn't do the back side of the drive side crank. No one will see if you take all your bike pics from the DS as you should. - £33 posted

10: Post mount Hayes CX5 cable disk brakes - single sided like a BB5. Better than you think they're going to be - £20 posted

11: Great condition SRAM Rival Yaw FD, braze on fitting - someone lost its washer for the bolt though. Looks like PlanetX have one for £1 - £16 posted

12: Beater condition 35.0mm band on Rival FD - £8 posted or something

13: BNIB 10 speed KMC chain - £10 posted or something?

Free with other stuff

14: 31.8mm band on Sora FD

15: 31.8mm band on Battaglin FD clamp, 34.9mm band on SRAM FD clamp

16: Cansucc interrupter/CX levers - yes, that's the brand name

17: Big bag o' black headset spacers. Couple of carbon ones but you aren't going to find a many matching ones

18: Big pile of rotors. I bought these off @Howard and then never used them. 2 × 180mm, 7 × 160mm, 3 × 140mm, all 6 bolt. Take some or all of them

19: Some old school pedals, missing the straps

20: Assorted SRAM brake levers - 10 speed era - 2 × Rival right with carbon lever blades + hoods, 1 × S500 alu left with no hood. No shifter internals. Only have 1 clamp for the bars so you either need to source one of those yourself or use for parts. Also a hood for left hand SRAM 11 speed non-hydro.

21: A star nut and top cap thing that allows you to run your front brake down the steerer, so you can do barspins - who was I kidding with this?

Nice picture formatting. GLWS.

Dibs DA shifters and SRAM bar end shifters

Dibs chain. PM'd

I’ll take seconds on the KMC chain.

Dibs the deore cranks and the rotors (180mm + 160mm) sending a PM now :)

Dibs Rival cranks

Desperate seconds on DA shifters...

I'll let you know if they don't go. But shocking coincidence - looks like you wanted some parts from an S500 left? I've got a bashed up one here for you!

2 Attachments

3 more things I found:

22: SRAM alu chainring bolts for a double - save a few grams you weenies, £10 posted?

23: Gusset 29.8mm seat clamp - £7 posted. I thought this was a 30mm and had it on my 30mm ST bike, so YMMV.

24: Roll of 20mm tubeless tape - not the easiest to work with - £4 posted or something. This is not official tubeless tape - it's "Kapton Tape Heat Resistant High Temperature Polyimide 100ft" but it does the job, you can google it

1 Attachment

Bloody heck mate! How much do you want for the S500?

Second dibs rival cranks if they’re still going

Dibs Sram X-7 shifter + derailleur. PM’dd

DA shifters, one set of Tektros, KMC chain, X7 bits, Rival cranks, Deore cranks all gone. SRAM TT500 shifters (and everything else) still available

I am once again moving flat and I've still got this crap

If anyone wants any of it feel free to make a low ball offer to get it gone from me

Friendly bump for some great prices.

Aero brake levers came in the post today, thanks again!

Messaged you last week…!

Totally missed this and your message. I'm away at the moment but I'll see what's left when I get back