You are reading a single comment by @bobble and its replies.
Click here to read the full conversation.
-
please can you share a picture? Cheers
Will post an update on my project and what magnet are suggesting
bobble-
sorry for the delay - hope these help somewhat, still very much WIP.
actually can’t push the box right back since the led strip was attached under the cabinet - need to sand down the box a couple of mm. box will then be tiled to match the splashback, has a notch cut out for the power outlet - it also won’t be ‘hard’ fixed, it’ll just sit there ready to be pulled out as and when access is needed
hvsds
We’ve just about finished our new kitchen with a Vaillant in a very similar position - got the deeper unit (600*480*720) but ended up cutting it down to 300 deep as it just fit - the unit doesn’t hang off the back wall brackets, is just screwed to the adjacent unit on one side and to the wall on the other, with the bottom sitting on the tiles underneath.
For the pipes, I’ve just made a two-sided plywood cover that will be tiled and slot over the pipework under the boiler/above the worktop.
Will take a photo when I’m back round later this afternoon.
edit: I should add that I probably wouldn’t have been able to make it work without the help of Ian the joiner