atk
yoshy
Soulnerd
Post a reply
About
SOLD: Kona Unit large, rolling chassis or split
Posted by
@M_V
Posted by
@M_V
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
SOLD
Selling my 2019 Kona Unit.
It's a large, (geo chart - https://konaworld.com/archive/2019/unit.cfm salient point are a 24.5" toptube and an 18.5" seattube).
Decent nick but there are scuffs and scratches in the paint. No dents or cracks though. I've also made two slight modifications to the frame, 1) removed the gear cable stop at the top of the seattube in order to run a musguard. 2) added a threaded boss to the centre of the chainstay yoke as I had a plan to do a build with full mudguards but I never got round to it. Both mods have been lacquered over.
Sliding dropouts so can be geared, singlespeed or fixed. Despite chat of a low bb on these, with the 29 x 2" tyres I had it built with the bb was sitting at like 11.5-12" which was plenty to run it fixed with a 170mm crank.
Bottle bosses in the usual places plus a set under the downtube and a set on each fork leg. Rack eyes etc too so really could be built however you wanted, monstercross, bikepacking, rowdy hardtail...
As a frameset it'd include frame, fork, headset, oe stem, bars and seatpost plus a Charge Spoon saddle.
As a rolling chassis I'd include the wheels which are an XT centrelock front hub and a Superstar v6 rear built onto Octane One rims, all set up tubeless with Vittoria Sanguaro 29 x 2.0 tyres. There is plenty room in the frame/fork for larger tyres by the way. Wheels are built by me and have had very little use, 100 miles or so probably.
I'd like £220 for the frame set and £220 for the wheelset or £375 for the 'rolling chassis'. Prices include postage.
I have a load of other bits and bobs that I'll likely get around to posting for sale at some point like a set of Shimano mt200 hydros, some ht2 cranks etc so I could probably do a full build too.
I can chuck in a bolt on cog to put on the disc mount on the rear hub too if you want to run it fixed.
SOLD
4 Attachments