You are reading a single comment by @schnizi and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
schnizi
Did it again :)
My latest project has internal hydraulic lines through the drop bars, stem, steerer tube, fork, down tube, BB shell and chainstay. Also routed the di2 wires through the chainstay, but that's easy with the new DA 12s. Here are some pics again:
Drilled/Dremeled a stem exit for 2 hydraulic lines.
Drilled an entry into the steerer, had to pull the hose through the headset in this awful bend...
Made an aluminium insert for the top of the steerer for mounting the top cap and allowing the hoses to route towards the stem and epoxied it in place.
Mounted the stem and pulled the hoses through.
Routed the hoses through the bars and installed decouplers underneath the tops for when I have to remove the bars.
And this is the end result :)