There's been a click on a single cog on a relatively new cassette. Cleaned and couldn't see any burrs or anything.
Cleaning the thru axle and back end while the wheel was off and I noticed the changeable hanger mount was loose. Similar to the Kinesis used to do. Hopefully it was that but if not, gonna check hanger straightness. Then I'm pretty much out of ideas.
Sound silly but is the cassette 100% on correctly? I’ve seen one with the smallest cog not properly fitted but the long lock ring engaged, although just barely.
There's been a click on a single cog on a relatively new cassette. Cleaned and couldn't see any burrs or anything.
Cleaning the thru axle and back end while the wheel was off and I noticed the changeable hanger mount was loose. Similar to the Kinesis used to do. Hopefully it was that but if not, gonna check hanger straightness. Then I'm pretty much out of ideas.