You are reading a single comment by @cornelius_blackfoot and its replies.
Click here to read the full conversation.
-
thanks, how will I know the difference from ebay photo's?
say for instance this one?
https://www.ebay.co.uk/itm/255528556802
cornelius_blackfoot-
Any rotors will be fine.
I'm guessing the wheels you are wanting to use will have a lockring to hold the rotor on but if not, you will need to buy some.
I have used these on my own wheels and several customers ones at work
https://www.wiggle.co.uk/prime-1520mm-center-lock-lockring
They say for 15 and 20mm thru axle but they're also a safe bet for 12mm axles.
Sometimes the end caps on 12mm wheels can make it impossible to get the tool in to tighten the other type of lockring. Like these -
I'll send you 2 shimano external ones for a fiver if you end up needing them.
PhilDAS
snottyotter
Rotors are the same but lockrings sometimes aren't cross compatible
The ones with the internal spline that use a cassette tool fit on QR wheels and some 12mm ones.
The ones with the external spline that use a hollow tech BB tool fit on pretty much all wheels