You are reading a single comment by @pompy and its replies. Click here to read the full conversation.
  • I'm having a bit of a chainline issue with my V3 Pompino. The wheels are original spec Planet x AL30s with On One hubs. Thing is, the chainline is about 45mm at the front and 40mm on the back leading to some chain noise.
    I'm selling the bike as it doesn't really get much use but don't want people to be put off; I swapped in the rear wheel from my other SS and it is super quiet (Halo hub with the correct chainline).
    Any suggestions or shall I just add on the advert about this issue?
    Cheers


    1 Attachment

    • IMG_20220405_143337.jpg
  • You could just add a spacer under the cog as long as there's still enough threads to properly engage the cog. Even if it's not the full 5mm, it will make it better. Slacken the chain a little bit.

  • Doesn't look like there's enough room to put the chainring on the inside?
    Smaller chainring on the inside and smaller rear cog?

About

Avatar for pompy @pompy started