Manufacturers are the worst for measurements, if they do supply them they are never right!
Even with sites like SJS that say they've measured stuff themselves I don't trust it. You can see them discussing discrepancies with manufacturer spec in the Q&A on this rim, https://www.sjscycles.co.uk/rims-tape/sun-cr18-16-x-1-38-349-abt-alloy-rim-silver-36-hole/ - yet I measured the rim myself and got a different result, which I then used to calculate spoke length and the wheel built up perfectly, proving their measurement was wrong.
I think items get revised or the machinery that's making it gets adjusted or the actual manufacturer changes so frequently that measuring stuff yourself is the only way to be sure.
That makes a lot of sense, Thank you!!
In the Calliper I trust.
I think I will check the weight of the hubs when i get them too, I have found the weight is always off nearly 50-100grams from manufacturers claims.
I still don't know where VIA hubs have come from, where they are made or anything.
Manufacturers are the worst for measurements, if they do supply them they are never right!
Even with sites like SJS that say they've measured stuff themselves I don't trust it. You can see them discussing discrepancies with manufacturer spec in the Q&A on this rim, https://www.sjscycles.co.uk/rims-tape/sun-cr18-16-x-1-38-349-abt-alloy-rim-silver-36-hole/ - yet I measured the rim myself and got a different result, which I then used to calculate spoke length and the wheel built up perfectly, proving their measurement was wrong.
I think items get revised or the machinery that's making it gets adjusted or the actual manufacturer changes so frequently that measuring stuff yourself is the only way to be sure.